Internal Cores
Downloads
product bulletin (4 MB)
| Typical Chemical Analysis | |
| Oxide | Weight % |
SiO2 ZrO4 Al2O3 TiO2 Fe2O3 | 80.0 20.0 0.086 0.032 0.008 |
| Typical Physical Properties | |
| Modulus Of Rupture (ASTM C-133) | 1100 - 1250 PSI |
| Apparent Specific Gravity (ASTM C-373-56) | 2.2 |
| Bulk Density (ASTM C-373-56) | 1.79 g/cm3 |
| Absorption (ASTM C-373-56) | 10.6% |
| Apparent Porosity (ASTM C-373-56) | 18.9% |
In addition to the typical internal core for steel applications , ICP has developed INCORAL ceramic cores specifically designed for aluminum applications.
INCORAL has been developed with the bond strength needed to withstand high injection pressures and unique properties which allow easy removal after casting solidification.
INCORAL ceramic cores are designed to be easily removed via water blast, mechanical or caustic leaching.
In some cases where soluble wax was the only option for an internal cavity, INCORAL ceramic cores are now used with the following advantages:
- increased yeilds...
- better quality...
- reduced cost...
- elimination of additional processing required with soluble waxes
| Typical Chemical Analysis - INCORAL | |
| Oxide | Weight % |
SiO2 Al2O3 TiO2 Fe2O3 | 99.88 0.086 0.032 0.008 |
| Typical Physical Properties | |
| Modulus Of Rupture (ASTM C-133) | 1100 - 1250 PSI |
| Apparent Specific Gravity (ASTM C-373-56) | 2.2 |
| Bulk Density (ASTM C-373-56) | 1.79 g/cm3 |
| Absorption (ASTM C-373-56) | 10.6% |
| Apparent Porosity (ASTM C-373-56) | 18.9% |
To place your order:
Phone (800) 427-2278
Fax(937)644-2646
Email: sales@industrialceramic.com
CastExpo '10
Visit us at booth #2317 for CastExpo '10 on March 20-23 at the Orange County Convention Center in Orlando, Florida!
ICP Awarded E-Award (Excellence in Exports)
Presented by former Gov. Bob Taft
The Ohio Statehouse Atrium
Contact ICP
14401 Suntra Way
Marysville, OH 43040
toll free: (800) 427-2278
outside U.S. (937) 642-3897
fax: (937) 644-2646
sales@industrialceramic.com